Understanding the Differences between Microdermabrasion Machines

When you hear of “microdermabrasion,” you will perhaps think about the creams and other skin care products with special granules for exfoliation; it’s now getting rarer to associate it with microdermabrasion machines. However, if you’re still fond of going into salons and are interested in their home versions, then you definitely have to know and understand what these machines are and how they differ.

Microdermabrasion Machines: Two Types

There are two general types of machine systems that are used when it comes to microdermabrasion. The first one—and the older—is crystal microdermabrasion.

In this process you are going to use medical grade and hopefully organic crystals such as those made from aluminum oxide to clear off the skin. They are normally contained in one cartridge. When you are ready to use the machine, the crystals then pass through a tube and into the hand piece you have. They are then “bombarded” into the skin to lift off dead skin cells.

While doing the procedure, the suction also removes the dead skin cells and used crystals and place them into another cartridge. This cartridge is then thrown away after the session.

The other kind if diamond microdermabrasion machine. This is often referred to as non-crystal microdermabrasion. Instead of using crystals, the wand tip is made from diamond, either synthetic or natural. The hand piece is directly used into the skin. There’s no need for cartridge either.

Best Microdermabrasion Machine

Of the two microdermabrasion machines, which one should you use? For better understanding, we are going to compare two at home microdermabrasion machine equipment.

First let’s talk about Crystalift microdermabrasion machine. As its name suggests, this one uses crystals. Now the crystals can be purchased at a relatively cheap price. The cost for 2 pounds of it will no more than $3. Organic crystals are known for their anti-bacterial properties, which is excellent for people who are suffering from acne scars. They can also enlarge the pores to get rid of trapped dirt.

Though aluminum oxide, which is the common composition of crystals, is only second to diamond in terms of hardness, it has rugged edges. Thus, it’s more effective in lifting dead skin cells.

However, there are two potential issues. First it’s possible that the crystals can remain in the body and worse get into the eyes, mouth, and nose. Though the crystals are inexpensive, you have to continuously refill the cartridge and even purchase a new cartridge. Along the way, you’re still going to spend more.
The diamond microdermabrasion machines use diamond tips, which, in this case, are usually synthetic. Diamonds are the hardest minerals, so you are assured they don’t disintegrate by constant use. You may have to invest more with the machines, but you can save cash in the long run.

Since they are crystal free, there’s lesser chance you are going to leave minute particles into the skin. Also, you can reach almost any area of your skin, such as near the eyes, without fear. But the tip can also be a breeding ground for bacteria, especially if you don’t properly clean it.

How to Buy

Hopefully, by knowing the difference between the two, you already have a good idea which of the machines you’re going to purchase. Just to further help you out, though, you can read up microdermabrasion machine reviews, some of which you can find in Amazon.